How To Remove A Power Supply - Sun Microsystems Enterprise 250 Owner's Manual

How to Remove a Power Supply

Before You Begin
It is not necessary to power off the system if you are removing a redundant power
supply. For more information see:
"About Power Supplies" on page 57
If your system has only one power supply, complete this task:
"How to Power Off the System" on page 26
What to Do
1. Identify the power supply to be removed.
2. Unplug both ends of the AC power cord.
There is no need to remove the power cord from the strain-relief tie-wrap attached to
the system rear panel.
3. Loosen the two captive screws securing the power supply to the chassis.
128 Sun Enterprise 250 Server Owner's Guide • June 1998