Sun Microsystems Enterprise 250 Owner's Manual page 180

2. Loosen the two captive Phillips screws that secure the board to its mounting
brackets.
One screw is located at the top edge, and the other is located at the bottom edge of
the power distribution board.
3. Remove the board from the chassis, and place it on an antistatic mat.
What Next
To replace the power distribution board, complete this task:
"How to Install the Power Distribution Board" on page 163
162 Sun Enterprise 250 Server Owner's Guide • June 1998
J0401
J0501
J0201
J0202
J0204
J0205
J0206
J0207