Sun Microsystems Enterprise 250 Owner's Manual page 250

5. When the OBDiag menu appears, enter the appropriate command and test
name/number at the command prompt.
For command usage and descriptions, see "OBDiag Commands" on page 225.
1 SUNW,envctrltwo@14,60
4 eeprom@14,0
7 scsi@3
10 su@14,3062f
Commands: test-all except help what printenvs setenv exit
command>
Note – For more information about OBDiag tests, see "About OpenBoot Diagnostics
(OBDiag)" on page 223.
Results
While OBDiag is running, you can observe its progress and any error messages on
the system or RSC console. You can use two OpenBoot PROM variables to affect
error reporting. Using the diag-verbosity variable, you can determine the type
and amount of information that is reported. Using the diag-continue? variable,
you can control how OBDiag behaves after an error is encountered. See "OBDiag
Configuration Variables" on page 225 for additional information.
A sample error message is provided below:
232 Sun Enterprise 250 Server Owner's Guide • June 1998
OBDiag - Version X.X
2 ebus@1
5 fdthree@14,3023f0
8 scsi@3,1
11 su@14,3083f8
ERROR: Did not receive expected loopback packet
DEVICE: /pci@1f,4000/network@1,1
FRU: motherboard
TIME: 03/21/1997 21:32:34 GMT
CALLER: loopback-test 100mb-xcvr-external-lpb-test catch.
3 ecpp@14,3043bc
6 network@1.1
9 scsi@14,400000
12 rsc