How To Install The Ultrascsi Backplane - Sun Microsystems Enterprise 250 Owner's Manual

Hide thumbs Also See for Enterprise 250:

Table of Contents

How to Install the UltraSCSI Backplane

1. Slide the UltraSCSI backplane into the backplane slot in the base of the disk

cage assembly.

Orient the backplane so that the six SCSI drive connectors are facing the open

2. Insert the six posts at the rear of the disk cage into the corresponding keyholes in

the backplane. Lift the backplane slightly so that each post rests in the narrow

part of a keyhole.

Removing and Installing Backplanes and Cables