3. Push the cage center divider back into the disk cage as far as it can go.
The center divider should engage the two large holes in the center of the backplane.
4. Replace the two screws that secure the cage center divider and the backplane to
the disk cage assembly.
What Next
To reassemble the system, complete these tasks:
"How to Install the Disk Cage Assembly" on page 142
"How to Install the Removable Media Assembly (RMA)" on page 104
"How to Install a Disk Drive" on page 110
"How to Install the Fan Tray Assembly" on page 126
"How to Install the Side Access Panel" on page 33
Note – When you reinstall the disk drives, it is important to return each drive to its
original location.
160
Sun Enterprise 250 Server Owner's Guide • June 1998