Sun Microsystems Enterprise 250 Owner's Manual page 159

5. From the underside of the chassis, use a large flat-blade screwdriver to loosen the
two captive screws that secure the disk cage to the bottom of the chassis.
6. Stand the chassis upright.
Enlist the help of another person to accomplish this safely.
7. From the top of the chassis, use a long flat-blade screwdriver to loosen the two
captive screws that secure the disk cage to the upper part of the chassis.
Insert the screwdriver through the two access holes on top of the chassis.
Caution – Take care to avoid damaging any cables that may be located near the
captive screws.
8. Remove the disk cage assembly through the open side of the chassis.
Place the assembly on an antistatic mat.
What Next
To replace the disk cage assembly, complete this task:
"How to Install the Disk Cage Assembly" on page 142
Chapter 7 Removing and Installing Miscellaneous Assemblies 141