3.5.3
UltraSPARC II Modules
Each CPU/Memory+ board has four connectors for UltraSPARC II modules (up to
two modules per board, two connectors per module). For each module, there is a
connector with 144 pins and a connector with 288 pins (
Screws (2)
288-pin connector
FIGURE 3-5
CPU Module Cover
CPU modules are now shipped with CPU module installation instructions and the
screw tightening sequence on the cover.
3.5.4
Handling Precautions
The following precautions should be exercised when handling UltraSPARC II
modules:
UltraSPARC II modules are static-sensitive and an antistatic wrist strap field kit
must be used when handling the modules.
3-10
Sun Enterprise 3500 System Reference Manual • August 2001
UltraSPARC II Module Connector Detail
).
FIGURE 3-5
Screws (3)
144-pin connector