Sun Microsystems Enterprise 3500 System Reference Manual page 246

SELV Compliance
Safety status of I/O connections comply to SELV
requirements.
Power Cord Connection
Caution – Sun products are designed to work
with single-phase power systems having a
grounded neutral conductor. To reduce the risk of
electric shock, do not plug Sun products into any
other type of power system. Contact your
facilities manager or a qualified electrician if you
are not sure what type of power is supplied to
your building.
Caution – Not all power cords have the same
current ratings. Household extension cords do
not have overload protection and are not meant
for use with computer systems. Do not use
household extension cords with your Sun
product.
Caution – Your Sun product is shipped with a
grounding type (three-wire) power cord. To
reduce the risk of electric shock, always plug the
cord into a grounded power outlet.
The following caution applies only to devices with a
Standby power switch:
Caution – The power switch of this product
functions as a standby type device only. The
power cord serves as the primary disconnect
device for the system. Be sure to plug the power
cord into a grounded power outlet that is nearby
the system and is readily accessible. Do not
connect the power cord when the power supply
has been removed from the system chassis.
Lithium Battery
Caution – On Sun CPU boards, there is a lithium
!
battery molded into the real-time clock, SGS No.
MK48T59Y, MK48TXXB-XX, MK48T18-XXXPCZ,
M48T59W-XXXPCZ, or MK48T08. Batteries are
not customer replaceable parts. They may
explode if mishandled. Do not dispose of the
battery in fire. Do not disassemble it or attempt to
recharge it.
H-2 Sun Enterprise 3500 System Reference Manual • August 2001
System Unit Cover
If you must remove the cover of your Sun computer
system unit in order to add cards, memory, or internal
storage devices, be sure to replace the top cover before
powering up your computer system.
Caution – Do not operate Sun products without
!
the top cover in place. Failure to take this
precaution may result in personal injury and
system damage.
Laser Compliance Notice
Sun products that use laser technology comply with
Class 1 laser requirements.
Class 1 Laser Product
Luokan 1 Laserlaite
Klasse 1 Laser Apparat
Laser Klasse 1
DVD-ROM
Caution – Use of controls, adjustments, or the
!
performance of procedures other than those
specified herein may result in hazardous
radiation exposure.
Einhaltung sicherheitsbehördlicher
Vorschriften
Auf dieser Seite werden Sicherheitsrichtlinien
beschrieben, die bei der Installation von Sun-Produkten
zu beachten sind.
Sicherheitsvorkehrungen
Treffen Sie zu Ihrem eigenen Schutz die folgenden
Sicherheitsvorkehrungen, wenn Sie Ihr Gerät installieren:
• Beachten Sie alle auf den Geräten angebrachten
Warnhinweise und Anweisungen.
• Vergewissern Sie sich, daß Spannung und Frequenz
Ihrer Stromquelle mit der Spannung und Frequenz
übereinstimmen, die auf dem Etikett mit den
elektrischen Nennwerten des Geräts angegeben sind.
• Stecken Sie auf keinen Fall irgendwelche Gegenstände
in Öffnungen in den Geräten. Leitfähige Gegenstände
könnten aufgrund der möglicherweise vorliegenden