Sun Microsystems Enterprise 3500 System Reference Manual page 82

ok show-devs
.
.
.
/pci@3,2000/pci@2
/pci@3,2000/pci@2/SUNW,isptwo@4 (identifies adapter SCSI interface)
/pci@3,2000/pci@2/SUNW,hme@0,1 (identifies adapter Ethernet interface)
/pci@3,2000/pci@2/pci108e,1000@0
/pci@3,2000/pci@2/SUNW,isptwo@4/st
/pci@3,2000/pci@2/SUNW,isptwo@4/sd
/pci@3,3500/SUNW,isptwo@3 (identifies board SCSI interface)
.
.
.
/pci@2,2000/pci@2
/pci@2,2000/pci@2/SUNW,isptwo@4 (identifies adapter SCSI interface)
/pci@2,2000/pci@2/SUNW,hme@0,1 (identifies adapter Ethernet interface)
/pci@2,2000/pci@2/pci108e,1000@0
/pci@2,2000/pci@2/SUNW,isptwo@4/st
/pci@2,2000/pci@2/SUNW,isptwo@4/sd
/pci@2,3500/SUNW,hme@1,1 (identifies board Ethernet interface)
4.6.7.5 Booting From a PCI+ I/O Board
For customers booting from a PCI+ I/O Board, the following procedure must be
completed in order to set up an nvalias command. Refer to the OpenBoot 3.x
Command Reference Manual for more information.
1. Use the show-devs command to check the board path:
You should see entries for the PCI+ I/O boards.
4-30 Sun Enterprise 3500 System Reference Manual • August 2001