Checking The Device After Storage - RMG USM GT400 Operating Manual

6 Transport and storage
1 Packing the device.
"Packing the device for transportation" on page 73
2 Observe the approved ambient temperature for storage.
80
Chapter 13.1, "Performance data" on page 178
6.3.2

Checking the device after storage

Gefahr
Mortal danger from damage in the warehouse
If the device is stored for longer than one year, the device may be damaged
from incorrect outer packaging or securing of the device. In potentially explosive
environment, a defective device may lead to an explosion. Danger of poisoning!
•
Avoid longer storage times.
•
Have the device checked by RMG service if the storage time is longer than
one year. For this purpose, send the device to RMG.
▪ Checking the device for any signs of damage
There is a high risk to life and limb if a damaged device is used.
The following damage can compromise safety and the function of the device:
• notches on the flange sealing surfaces
• corrosion in the device or on the sealing surfaces
• cracked glass of the viewing window
• clouded glass of the viewing window
• cracks, flaking on the housing or the covers
• flaking paint
1 Check that the device is intact by a visual inspection.
If you discover that there is, e.g., any damage or other damage to the device,
the device may only be re-used after consulting RMG.
2 If damaged: please contact RMG services.
Manual USM GT400 · EN10 · May 2021