Qualification Of The Personnel - RMG USM GT400 Operating Manual

5 Safety

5.3 Qualification of the personnel

Operating personnel
56
Maintenance personnel Work on the device must only be carried out by special-
Danger
Observe the following safety instructions
Non-observance of these safety instructions can lead to a risk of life and limb
and health of the person as well as damage to the environment or property
damage
.
Manual USM GT400 · EN10 · May 2021
The operating personnel are to use and operate the
device within the scope of the intended purpose.
ist personnel that can carry out the respective work as-
signed to them as a result of their training, knowledge
and experience as well as the applicable regulations.
These specialist personnel are familiar with the legal
guidelines for accident prevention and can evaluate and
avoid possible risks by themselves.
• Mechanical installation must only be carried out by
the respectively qualified specialist personnel.
• Installation on electrical components must only be
carried out by qualified electricians.
The specialist personnel require a training especially for
working in potentially explosive environment.
Specialist personnel are persons that can verify a train-
ing / further education according to DIN VDE 0105, IEC
364 or a similar national standards.
• Initial start up must only be carried out by especially
trained personal (training by RMG) or by service per-
sonal from RMG.
• Maintenance and cleaning must only be carried out
by the respectively qualified specialist personnel.