Table of Contents
Advertisement
6 Transport and storage
Sealing the flange with protective stickers
78
1
Clean the sealing area with grease remover.
The sealing surface must be free of grease and contamination.
2
Stick the protective sticker (A) onto the sealing surface of the flange (B).
Sealing the flange with blind plugs
1
Insert the blind plugs into the opening of the flange so that the blind plugs
have a tight fit.
▪ Applying the outer packaging to the device
Notice
Damage caused to the device from incorrect storage / transport
If the device is not protected correctly by the packaging material, dirt or humidity
may enter the device and damage it.
•
Pack the device according to the instruction.
•
Consider the special transport requirements on the packaging material, e.g., for
transport overseas.
•
Please contact RMG service in case of doubt.
Manual USM GT400 · EN10 · May 2021
1
Protective sticker
2
Flange
Fig. 6.12: Applying the protective sticker
Advertisement
Table of Contents
