Table of Contents
Advertisement
6 Transport and storage
74
The retaining bolts are screwed into the device ex-factory. These ensure for a safe
position.
1
Make sure that the retaining bolts are screwed in and that the counter-nuts
are secured.
Recommendation: remove the retaining bolts only if it is absolutely necessary.
This is the only way to ensure that the device does not tip over or roll away
after being installed
▪ Lifting the device onto the Euro pallet
Manual USM GT400 · EN10 · May 2021
1
Retaining bolts with counter-nuts
Fig. 6.7: Check the retaining bolts
1 Lifting eyes
2 Lifting gear chains
Fig. 6.8: Attaching the lifting gear
Advertisement
Table of Contents
