Table of Contents
Advertisement
Warning
Risk of injury during transport
The device may be damaged when lifting and putting down, tipping over or
falling down. By disregarding the load bearing capacity of the lifting gear, the
device may fall. There is a risk of severe injuries for persons in the vicinity.
•
Lift the device only on the intended lifting eyes.
•
Before lifting, make sure that the load is safely secured.
•
Never stand under suspended loads.
•
Observe the weight specifications for the ultrasonic gas meter at hand.
1
Attach a suitable lifting gear (2) to the lifting eyes (1) of the device.
2
Tension the chain of the lifting gear slightly.
3
Undo the bolted connections from the system so that the device can be lifted
out.
Fig. 6.9: Secure the device on the Euro pallet
4
Place the Euro pallet under the device.
Without the retaining bolts (1) the flange must be guided between the timber
wedges (3).
1
Retaining bolts
2
Tension straps
3
Timber wedge
6 Transport and storage
Manual USM GT400 · EN10 · May 2021
75
Advertisement
Table of Contents
