RMG USM GT400 Operating Manual page 84

Ultrasonic flowmeter
Hide thumbs Also See for USM GT400:
Table of Contents

Advertisement

6 Transport and storage
Warning
Risk of injury during transport
76
The device may be damaged when lifting and putting down, tipping over or
falling down. By disregarding the load bearing capacity of the lifting gear, the
device may fall. There is a risk of severe injuries for persons in the vicinity.
Lift the device only on the intended lifting eyes.
Before lifting, make sure that the load is safely secured.
Never stand under suspended loads.
Observe the weight specifications for the ultrasonic gas meter at hand.
5
Carefully place the device on the Euro pallet with the lifting gear.
6
Secure the device using the tensioning straps (2).
The tensioning straps must have a tight fit and must secure
▪ Place the corrosion protection mat inside the device
Notice
Damage to the device from corrosion
If the device is not protected against corrosion, the function of the
device may be affected.
Place the corrosion protection mat inside the device.
Manual USM GT400 · EN10 · May 2021
1
Position of the corrosion protection mat
Fig. 6.10: Corrosion protection mat in the device
the device.

Advertisement

Table of Contents
loading

Table of Contents