Storage; Packing The Device For Storage - RMG USM GT400 Operating Manual

Ultrasonic flowmeter
Hide thumbs Also See for USM GT400:
Table of Contents

Advertisement

Use the original packaging that was supplied along with the device. Please contact
RMG service if you have any questions.
Options for the outer packaging can be, for example:
• sea-proof wooden crate
• cardboard packaging
1
Protect the device in the outer packaging against environmental influences.

6.3 Storage

In this chapter you will receive information on the correct storage of the device.
You are also provided with information that must be observed when storing for
long periods.
Danger
Mortal danger from damage in the warehouse
If the device is stored for longer than one year, the device may be damaged
from incorrect outer packaging or securing of the device. In potentially explosive
environment, a defective device may lead to an explosion. Danger of poisoning!
Avoid long storage times.
Have the device checked by RMG service if the storage time is longer than
one year. For this purpose, send the device to RMG.
6.3.1

Packing the device for storage

Notice
Damage caused to the device from incorrect storage / transport
If the device is not protected correctly by the packaging material, dirt or humidity
may enter the device and damage it.
Pack the device according to the instruction.
Consider the special transport requirements on the packaging material,
e.g., for transport overseas.
Please contact RMG service in case of doubt.
6 Transport and storage
Manual USM GT400 · EN10 · May 2021
79

Advertisement

Table of Contents
loading

Table of Contents