Working With The Device - RMG USM GT400 Operating Manual

Ultrasonic flowmeter
Hide thumbs Also See for USM GT400:
Table of Contents

Advertisement

1.2.4

Working with the device

1.2.4.1
Safety instructions Danger, Warning, Caution and Note
Danger
All of the following safety notices must be observed!
Disregard of the safety notices can result in danger to the life and limb or
environmental and property damage.
Bear in mind that the safety warnings in this manual and on the device cannot
cover all potentially dangerous situations, because the interaction of various condi-
tions can be impossible to foresee. Merely following the instructions may not suf-
fice for correct operation. Always remain attentive and consider potential conse-
quences.
• Read this operating manual and especially the following safety notices care-
fully before working with the device for the first time.
• Warnings are provided in the operating manual for unavoidable residual
risks for users, third parties, equipment, or other property. The safety in-
structions used in this manual do not refer to unavoidable residual risks.
• Only operate the device in fault-free condition and in observance of the op-
erating manual.
• Compliance with local statutory accident prevention, installation and assem-
bly regulations is also mandatory.
Caution
All notices in the manual must be observed.
Use of the gas chromatograph PGC 9300 is only permitted in accordance
with the specifications in the operating manual.
RMG assumes no liability for damages arising due to disregard of the op-
erating manual.
1 About this manual
Manual USM GT400 · EN10 · May 2021
5

Advertisement

Table of Contents
loading

Table of Contents