Table of Contents
Advertisement
Observe the applicable national and local guidelines for disposal. Ask your
local authorities about the legal guidelines at your company location as well
as about the regional disposal companies or collecting points.
The device mainly comprises materials that can be disposed of as old metal. In the
following we shall specify the components that may not be disposed of as old
metal.
Ultrasonic electronics
Electric components are contained in the housing of the ultrasonic electronics that
must be disposed of as electric waste. In order to remove the ultrasonic electron-
ics, you have to remove the cover of the ultrasonic electronics.
Chapter 10.2.3, "Opening the cover of the ultrasonic electronics" on page 145
Battery
The battery is attached to the PCB of the ultrasonic electronics. In order to remove
the battery, you have to remove the cover of the ultrasonic electronics.
Chapter 10.2.3, "Opening the cover of the ultrasonic electronics" on page 145
Transducer
The transducer comprises titanium, plastic and heavy metals (e.g., lead in piezo
crystal). The transducers must be disposed of according to the applicable national
and local guidelines.
In order to remove the transducers, RMG service shall inform you of the proce-
dure.
„Manufacturer" on the inside cover
11 Maintenance
Manual USM GT400 · EN10 · May 2021
169
Advertisement
Table of Contents
