Table of Contents
Advertisement
8 Installation
118
The proposal must then be "entered", i. e. adopted. In the complete menu you can
see that many other parameters are transferred in addition to the flow rate.
The connection and selection of all other ultrasonic gas meters listed below are
also possible due to legal metrology purposes.
Coordinate VJ98 selected button is used to enter which suggestion was entered.
Notice
Attention:
Even if in the same field with the same register, e. g. the information "swirl" is
transmitted, the value is "swirl" is dependent form the device and path
configuration used. It might be (significantly) different for the various devices.
The same applies to all device-specific parameters.
Manual USM GT400 · EN10 · May 2021
Fig. 8.23: Selection of DSfG: F-Instanz in VJ98
Advertisement
Table of Contents
