Table of Contents
Advertisement
Test log
Calibration certificate
Material test certificate
Strength test certificate 3.1.
1.2.9
Storage
Avoid extended periods of storage. After storage, inspect the device for damage and
test for correct function. Contact the RMG service department to arrange for inspec-
tion of the device after a storage period of longer than one year. For this purpose, re-
turn the device to RMG.
Note
Storage must take place in a dry and protected room.
It must be ensured that all open pipes are sealed.
1.2.10
Disposal
Dispose of the packaging and protective material (e.g. drying mats) as well as the
parts and devices supplied in an environmentally friendly manner in accordance
with the country-specific laws, standards and guidelines.
When disposing of the device, observe the overview of the materials used on page
82.
Before disposing of the device, remove the batteries, mask their contacts and dis-
pose of the batteries separately.
Residual amounts of lubricating oil in the bottles supplied must also be disposed of
separately.
Make sure that your disposal company is authorized to dispose of the relevant parts
and materials.
Manual TME400-VMF · EN11 · January 22nd, 2024
1 Introduction
1
1
1
Op-
tional
15
Advertisement
Table of Contents
