Table of Contents
Advertisement
1.3 Explosion-proof design
1.3.1
General information
Danger
The USM GT400 is permitted for installation in explosion-prone areas in Zone 1 that
are endangered by gas and vapor assigned to explosion group IIB+H
ture class T6.
ATEX – Zulassungsnummer: BVS 14 ATEX E 034 X
Code:
II
2G Ex de IIB+H
The device conforms to the requirements of Directive 94/9/EC.
The applicable regulations must always be observed during installation and opera-
tion. The device is approved for operation in hazardous areas. The permitted elec-
trical data can be found in chapter 8.3 Connecting the device electrically.
Danger
Risk of destruction by body electricity, e.g. due to friction of clothing - ap-
propriate protective clothing must be worn.
Notice
During installation, it must be ensured that the enclosure protection class
is observed. Direct sunlight must be avoided.
The USM GT400 complies with protection class IP66 due to EN 60529.
T6 Gb
2
1 About this manual
and tempera-
2
Manual USM GT400 · EN10 · May 2021
17
Advertisement
Table of Contents
