8 Installation
8.3.3
Connecting the computer for RMGView
110
1
Connect the computer to the terminals RS 485-0 (1).
In order to connect, you need an interface converter from USB to RS 485.
(please see recommendations in chapter 8.3.4).
8.3.4
Connecting the flow computer
Manual USM GT400 · EN10 · May 2021
1
Terminal connections
2
Service connection
Fig. 8.13: Connection assignment on the terminal strip
1
Ex-de according to ATEX and IECEx
Fig. 8.14: Connection box types
USM