Table of Contents
Advertisement
1 About this manual
The USM GT 400 is permitted for operation in Ex Protection Zone 1, but only
within the permissible temperature range (Chapter 13: Technical specifications).
14
1.2.6.3
Responsibility of the operator
As the operator, you must ensure that only adequately qualified personnel work on
the device. Ensure that all employees who work with the device have read and un-
derstood this manual. You are also obligated to train personnel regularly and in-
form them of the dangers. Ensure that all work on the device is carried out exclu-
sively by qualified persons and inspected by responsible qualified supervisors. The
responsibilities for installation, operation, fault rectification, maintenance and
cleaning must be clearly regulated. Instruct your personnel with regard to the risks
involved with working with the device.
Suitable personal protective equipment must be used for all work on the USM
GT400, which you as the operator must provide. This also applies even though all
sharp edges on the device have been removed as far as possible.
1.2.7
Transport
The device is packaged specific to the transport requirements for each customer.
Ensure safe packaging that absorbs light impact and vibrations is used for any fur-
ther transport. Nevertheless, inform the transport company that all types of impact
and vibrations should be avoided during transport.
The following applies in particular to transport:
• Shocks and vibrations are to be avoided
• Protect the USM GT400 from moisture
• If you suspect improper transport or damage during transport, please contact
RMG's service department immediately
Manual USM GT400 · EN10 · May 2021
Advertisement
Table of Contents
