Table of Contents
Advertisement
10.2 Calling up and changing the parameters via
the ultrasonic electronics
This chapter provides you with information for operating the ultrasonic electronics
via the display with a control panel.
The parameters can be called up and changed via the display with control
panel or RMGView
Software instructions RMGView
Fig. 10.1: Magnet for operating the buttons
When the cover of the ultrasonic electronics is closed, the buttons can be operated
using the magnets supplied. In order to operate the buttons with the magnets (2),
the magnet must be placed on the glass in the position with the switching point (1)
of the button.
USM
.
USM
(separate document)
1
Switch point
2
Magnet
10 Operation
Manual USM GT400 · EN10 · May 2021
139
Advertisement
Table of Contents
