Table of Contents
Advertisement
1 About this manual
1.2 Specialized knowledge required
This manual provides information that is necessary for fault-free and safe opera-
tion.
2
The Ultrasonic Flowmeter USM GT400 was designed and produced according to
the state of the art and generally recognized safety standards and directives. How-
ever, its use can entail dangers that are avoidable by complying with this manual.
The device must only be used as intended and in technically sound condition.
Vorsicht
Unintended use voids all warranty claims and the Ultrasonic Flowmeter
USM GT400 can also lose its approvals.
1.2.1
Specialized knowledge required
Persons working with or on the device must have the following knowledge:
• training / education for working in potentially explosive environments.
• the ability to correctly assess dangers and risks when using the device. Possi-
ble dangers are, e.g., components under pressure or the result of incorrect in-
stallation.
• recognize dangers that could be caused by the used flow medium.
• training / education by RMG for working with gas measuring instruments.
• education / instruction in all country-specific standards and directives to be ob-
served for work that is to be carried out on the device.
Further information can be found under:
Chapter 5.3, „Qualification of the personnel" on page 56
Manual USM GT400 · EN10 · May 2021
Advertisement
Table of Contents
