The following belong to the transport locks:
▪ Blind plug
▪ Protective sticker
▪ Retaining bolts
▪ Recommendation: remove the retaining bolts only if it is absolutely
necessary. This is the only way to ensure that the device does not tip over or
roll away after being installed.
▪ Corrosion protection mat
6.1.6
Removing the transporting locks
The removal of the transport locks is described here on the example of a connec-
tion or flange. The transport locks also have to be removed from all connections
where the transport locks are located.
▪ Removing the protective sticker / blind plugs from the flanges
The flanges are supplied sealed with a protective sticker or blind plug made
of plastic.
1
Protective sticker
2
Flange
Fig. 6.5: Removing the protective sticker
6 Transport and storage
Manual USM GT400 · EN10 · May 2021
71