Table of Contents
Advertisement
5.4 Safety instructions
Note that the safety instructions in this operating instruction and on the device
cannot cover all possible hazardous situations as the combination of different
circumstances is impossible to predict. To simply follow the instructions specified
may not normally be sufficient enough to ensure for correct operation. Always be
observant and also consider the following:
• Before working with the device for the first time, read through this operating in-
struction and, in particular, follow the safety instructions carefully.
• Always keep the operating instructions within reach for use at the place of in-
stallation.
• The operating instruction warns against the residual risks for users, third par-
ties, devices or other material assets. The safety instructions used refer to
residual risks that cannot be avoided due to the design.
• For safe operation, the safety instructions must be observed and followed.
• Operate the device only in a sound state and when observing the operating
instruction.
• Also observe the local legal accident prevention, installation and assembly
• guidelines.
• The manufacturer is not responsible for any damage that result as a conse-
quence of not observing the operating, instruction.
• Service and maintenance work or repairs that are not described in the operat-
ing instruction must not be carried out without previous consultation with the
manufacturer.
• Changes to the device are forbidden.
• For safe operation, the technical specifications must be observed and followed.
Performance limits must not be exceeded.
• For a safe operation, the device must only be used in the scope of its intended
use.
The device is exposed to different life phases, such as, e.g., installation,
start upstart up, operation, maintenance and cleaning.
The following sections must be sorted thematically according to the life phases.
5 Safety
Manual USM GT400 · EN10 · May 2021
57
Advertisement
Table of Contents
