Buttons
When the cover is closed, the buttons can be operated through the glass using the
magnet supplied. The cover must not be opened.
Change to the columns. Jump, e.g., from A to B and back again.
When holding for a longer time, you can change the columns by quickly
scrolling back.
When holding for a longer time, you can change the columns by quickly
scrolling back.
When holding for a longer time, you can change the lines quickly scrolling
forward.
Change or scroll back in the lines step by step, e.g., from A-01 to A-02.
When holding for a longer time, you can change the lines with quick return.
Enter values.
Reset button
1
The reset button (1) is for RMG service only. If the reset
button is pressed, the ultrasonic electronics is restarted.
Switches
1
Calibration switch: Activate to change parameters.
2
Service switch: For RMG service only. For installing a new firm-
ware.
3 Device overview
Manual USM GT400 · EN10 · May 2021
29