Transport - RMG PGC 9300 Operating Manual

• They are intrinsically safe devices for which galvanic isolation must be pro-
vided with connection of these devices.
The gas chromatograph PGC 9300 is permitted for operation in Ex Protection
Zone 1, but only within the permissible temperature range (Appendix 1: Technical
data).
1.2.6.3 Responsibility of the operator
As the operator, you must ensure that only adequately qualified personnel work on
the device. Ensure that all employees who work with the device have read and un-
derstood this manual. You are also obligated to train personnel regularly and in-
form them of the dangers. Ensure that all work on the device is carried out exclu-
sively by qualified persons and inspected by responsible qualified supervisors. The
responsibilities for installation, operation, fault rectification, maintenance and
cleaning must be clearly regulated. Instruct your personnel with regard to the risks
involved with working with the device.
Suitable personal protective equipment must be used for work on the PGC 9300
that you, as the operator, must provide. This applies despite the fact that all sharp
edges on the device were removed as far as possible.
1.2.7

Transport

Warning
The PGC 9300 is a highly technical, quality device with glass tubes and
delicate connections that partially contain flammable, explosive gases.
Therefore, any transport of the chromatograph must be carried out care-
fully and cautiously!
The device is packaged specific to the transport requirements for each customer.
Ensure safe packaging that absorbs light impact and vibrations is used for any fur-
ther transport. Nevertheless, inform the transport company that all types of impact
and vibrations should be avoided during transport.
The following applies in particular for transport:
• Impact and vibrations must be avoided
• Protect the PGC 9300 from moisture
1 About this manual
Manual PGC 9300 EN07 June, 18th 2018
11