Danger During Operation; Dangers Of Operation In Ex Areas; Responsibility Of The Operator; Transport - RMG TME400-VMF Operating Manual

1 Introduction
1.2.6.1.
Observe the specifications of the system manufacturer and/or system operator.
1.2.6.2.
12
Only operate the device in fault-free and complete condition.
If you make technical changes to the device, safe operation can no longer be guaran-
teed.
Danger
Only use the device in its original condition. The TME400 is permitted for op-
eration in Ex Protection Zone 1, but only within the permissible temperature
range (chapter 1.3.4.1 Temperature ranges).
1.2.6.3.
As the operator, you must ensure that only adequately qualified personnel work on
the device. Ensure that all employees who work with the device have read and un-
derstood this manual. You are also obligated to train personnel regularly and inform
them of the dangers. Ensure that all work on the device is carried out exclusively by
qualified persons and inspected by responsible qualified supervisors. The responsi-
bilities for installation, operation, fault rectification, maintenance and cleaning must be
clearly regulated. Instruct your personnel with regard to the risks involved with work-
ing with the device.
1.2.7.
The device is packaged specific to the transport requirements for each customer.
Ensure safe packaging that absorbs light impact and vibrations is used for any further
transport. Nevertheless, inform the transport company that all types of impact and
vibrations should be avoided during transport.
Manual TME400-VMF · EN02 · 2018 September 6th

Danger during operation

Dangers of operation in EX areas

Responsibility of the operator

Transport