Check Enhanced Global Mirror Group Consistency; Check Logical Drive Parity - IBM System Storage DS3000 Programming Manual

Minimum Firmware Level
7.84

Check Enhanced Global Mirror Group consistency

This command changes the application type associated with the Performance Read Cache. The
application type can be web server, database, or multimedia. Changing the application type changes the
block size, subblock size, populate on read threshold, and populate on write threshold for the logical
drives underlying the Performance Read Cache.
Syntax
set performanceReadCache [performanceReadCacheName]
usageHint=(webServer|dataBase|fileSystem)
Parameters
None

Check Logical Drive Parity

This command checks a logical drive for parity and media errors and writes the results of the check to a
file.
Syntax
check logicalDrive [logicalDriveName]
parity [parityErrorFile=filename]
[mediaErrorFile=filename]
[priority=(highest | high | medium | low | lowest)]
[startingLBA=LBAvalue] [endingLBA=LBAvalue]
[verbose=(TRUE | FALSE)]
Parameters
Parameter
logicalDrive
parityErrorFile
mediaErrorFile
Description
The name of the specific logical drive for which you want to
check parity. Enclose the logical drive name in square
brackets ([ ]). If the logical drive name has special characters,
you also must enclose the logical drive name in double
quotation marks (" ").
The file path and the file name to which you want to save the
parity error information. Enclose the file name in double
quotation marks (" "). For example:
file="C:\Program Files\CLI\logs\parerr.txt"
This command does not automatically append a file extension
to the saved file. You must specify a file extension when
entering the file name.
The file path and the file name to which you want to save the
media error information. Enclose the file name in double
quotation marks (" "). For example:
file="C:\Program Files\CLI\logs\mederr.txt"
This command does not automatically append a file extension
to the saved file. You must specify a file extension when
entering the file name.
Chapter 3. Script Commands
3-47