IBM System Storage DS3000 Programming Manual page 41

Table 2-4. Recurring Syntax Elements (continued)
Recurring Syntax
instance-based-repository-spec
count-based-repository-spec
wwID
gid
host-type
host-card-identifier
backup-device-identifier
nvsram-offset
nvsram-byte-setting
nvsram-bit-setting
ipv4-address
ipv6-address
Syntax Value
repositoryRAIDLevel=repository-raid-level
repositoryDrives=(drive-spec-list)
[enclosureLossProtect=boolean
[drawerLossProtect=(TRUE | FALSE)
repositorysubsystem=subsystem-number
freeCapacityArea=integer-literal
Specify repositoryRAIDLevel with
repositoryDrives. Do not specify the RAID level
or the disk drives with the subsystem. Do not
set enclosureLossProtect when you specify a
subsystem.
repositoryRAIDLevel=repository-raid-level
repositoryDriveCount=integer-literal
[repositorysubsystemUserLabel=user-label]
4
[driveType=drive-type ]
[enclosureLossProtect=boolean
[drawerLossProtect=(TRUE | FALSE)
5
[T10PI=(none | enabled)
World-Wide Identifier
Group Identifier
string-literal | integer-literal
(1 | 2 | 3 | 4)
(1 | n | all)
n is a specific slot number.
Specifying all includes all of the cache backup
devices available to the entire storage subsystem.
hex-literal
nvsram-value-> 0xhexadecimal |
integer-literal
nvsram-mask, nvsram-value-> 0xhexadecimal,
0xhexadecimal | integer-literal
Four groups of four numeric characters (0-9)
separated by period "."
(0255).(0255).(0255).(0255)
Eight groups of four hexadecimal characters (0-9
and A-F) separated by semicolon ":"
(02AF):(02AF):(02AF):(02AF):
(02AF):(02AF):(02AF):(02AF)
1
]
2
]) |
3
2
]
2
] |
] |
Chapter 2. About the Script Commands
2-7