Show Logical Drive Performance Statistics; Show Logical Drive Reservations; Show Storage Subsystem - IBM System Storage DS3000 Programming Manual

Show Logical Drive Performance Statistics

This command returns information about the performance of the logical drives in a storage subsystem.
Syntax
show (alllogicalDrives | logicalDrive [logicalDriveName]
logicalDrives [logicalDriveName1 ... logicalDriveNameN] performanceStats
Parameters
Parameter Description
alllogicalDrives The setting to return performance statistics about all
of the logical drives in the storage subsystem.
logicalDrive or The name of the specific logical drive for which you
are retrieving performance statistics. You can enter
logicalDrives
more than one logical drive name. Enclose the logical
drive name in square brackets ([ ]). If the logical drive
name has special characters, you also must enclose the
logical drive name in double quotation marks (" ").

Show Logical Drive Reservations

This command returns information about the logical drives that have reservations.
Syntax
show (alllogicalDrives | logicalDrive [logicalDriveName] |
logicalDrives [logicalDriveName1 ... logicalDriveNameN]) reservations
Parameters
Parameter
allLogicalDrives
logicalDrive or
logicalDrives

Show Storage Subsystem

This command returns configuration information about the storage subsystem. The parameters return
lists of values for the components and features in the storage subsystem. You can enter the command
with a single parameter or more than one parameter. If you enter the command without any parameters,
the entire storage subsystem profile is shown (which is the same information as if you entered the
profile parameter).
Syntax
show storageSubsystem autoSupportConfig profile batteryAge connections defaultHostType
healthStatus hostTypeTable hotSpareCoverage features time logicalDriveDistribution summary
Description
The setting to return persistent reservation information
about all of the logical drives in the storage subsystem.
The name of the specific logical drive for which you are
retrieving persistent reservation information. You can enter
more than one logical drive name. Enclose the logical drive
name in square brackets ([ ]). If the logical drive name has
special characters, you also must enclose the logical drive
name in double quotation marks (" ").
Chapter 3. Script Commands
3-269