Delete Disk Pool - IBM System Storage DS3000 Programming Manual

Notes
If the Enhanced FlashCopy images cannot be deleted for all of the relevant consistency groups, the
operation fails and none of the Enhanced FlashCopy images are deleted.
When you delete a consistency group Enhanced FlashCopy image that is associated with a consistency
group Enhanced FlashCopy logical drive, the corresponding Enhanced FlashCopy logical drive member
in the consistency group Enhanced FlashCopy logical drive are transitioned to the Stopped state. An
Enhanced FlashCopy logical drive member in the Stopped state no longer has a relationship to the
Enhanced FlashCopy group of the deleted Enhanced FlashCopy image. However, an Enhanced
FlashCopy logical drive member in the Stopped state keeps its relationship to its consistency group
Enhanced FlashCopy logical drive.

Delete Disk Pool

This command deletes a disk pool.
Syntax
delete diskPool [diskPoolName] [force=(true | false))]
Parameter
Parameter
diskPoolName
force
Notes
Each disk pool name must be unique. You can use any combination of alphanumeric characters,
underscore (_), hyphen(-), and pound (#) for the user label. User labels can have a maximum of 30
characters.
If the disk pool contains logical drives, the logical drives will be deleted along with the disk pool.
Description
The name of the disk pool that you want to delete.
Enclose the disk pool name in square brackets ([ ]). If the
disk pool name has special characters, you also must
enclose the host group name in double quotation marks
(" ").
Under normal operation, deleting a disk pool will
automatically delete the pool whether there are logical
drives present or not. The force parameter has special
meaning in the following cases: If the
GlobalFeatureState DELETE_LOGICALDRIVE_RESTRICTION
feature is present, and the Preference Store key
DELETE_LOGICALDRIVE_RESTRICTIONS_KEY are both true,
then restrictions for deleting disk pools with logical
drives are in effect. If both conditions are true, and the
user has specified "force=true", then the disk pool will
be deleted even if it has logical drives. If both flags are
true, the disk pool has logical drives and the force flag
has not been specified, the operation will fail.
Chapter 3. Script Commands
3-111