Set Iscsi Initiator - IBM System Storage DS3000 Programming Manual

Parameters
Parameter Description
hostPort The name of the HBA host port for which you want to
change the host type, or for which you want to create a new
name. Enclose the HBA host port name in square brackets
([ ]). If the HBA host port label has special characters, enclose
the HBA host port label in double quotation marks (" ").
The name of the host to which the HBA host port is
host
connected. Enclose the host name in double quotation marks
(" ").
The new name that you want to give to the HBA host port.
userLabel
Enclose the new name of the HBA host port in double
quotation marks (" ").
Notes
When you use this command, you can specify one or more of the optional parameters.
You can use any combination of alphanumeric characters, hyphens, and underscores for the names.
Names can have a maximum of 30 characters.
Related Topic
Naming Conventions

Set iSCSI Initiator

This command sets the attributes for an iSCSI initiator.
Syntax
set iscsiInitiator iscsiName] |
userLabel=newName |
host=newHostName |
chapSecret=newSecurityKey
Parameters
Parameter
iscsiName
userLabel
host
chapSecret
Description
The name of the iSCSI initiator for which you want to
set attributes. Enclose the value in double quotation
marks (" ").
The new name that you want to use for the iSCSI
initiator. Enclose the value in double quotation marks
(" ").
The name of the new host to which the HBA host port
is connected. Enclose the value in double quotation
marks (" ").
The security key that you want to use to authenticate a
peer connection. Enclose the value in double quotation
marks (" ").
Chapter 3. Script Commands
3-215