Save Storage Subsystem Diagnostic Data Capture; Save Storage Subsystem Events - IBM System Storage DS3000 Programming Manual

Syntax
save storageSubsystem diagnosticData [(controller | esm)]
file="filename"
Parameters
Parameter
diagnosticData
file

Save Storage Subsystem Diagnostic Data Capture

This command saves a diagnostic data capture to a specified file on a host.
Syntax
save storageSubsystem ddc file="filename"
Parameters
Parameter
file

Save Storage Subsystem Events

This command saves events from the Major Event Log to a file. You can save all of the events or only the
critical events.
Syntax
save storageSubsystem (allEvents | criticalEvents)
file="filename"
[count=numberOfEvents]
Parameters
Parameter Description
The name of the file to which you want to save the events. Enclose
file
the file name in double quotation marks (" ").
The number of events or critical events that you want to save to a
count
file. If you do not enter a value for the count, all events or all critical
events are saved to the file. If you enter a value for the count, only
that number of events or critical events (starting with the last event
entered) are saved to the file. Use integer values.
Notes
You have the option to save all events (allEvents) or only the critical events (criticalEvents).
Description
This parameter allows you to downloads the diagnostic data
from either the controllers or the ESMs.
The name of the file to which you want to save the diagnostic
data. Enclose the file name in double quotation marks (" ").
Description
The file path and the file name to which you save the
diagnostic data capture. Enclose the file name in double
quotation marks (" "). For example:
file="C:\subsystem Backups\DBMbackup_03302010.core"
Chapter 3. Script Commands
3-177