Delete Enhanced Global Mirror Group; Delete Consistency Group; Delete Consistency Group Enhanced Flashcopy Logical Drive - IBM System Storage DS3000 Programming Manual

Delete Enhanced Global Mirror Group

This command deletes one or more Enhanced Global Mirror Groups from the local storage subsystem
and the remote storage subsystem.
Syntax
Note: The Enhanced Global Mirror Group must be empty before it can be successfully deleted. You must
remove all Enhanced Global Mirrored pairs from the Enhanced Global Mirror Group before using this
command.
delete enhancedGlobalMirrorGroup
(allenhancedGlobalMirrorGroups |
enhancedGlobalMirrorGroup["enhancedGlobalMirrorGroupName"] |
enhancedGlobalMirrorGroups
["enhancedGlobalMirrorGroupName_01""enhancedGlobalMirrorGroupName_02"])
Parameters
None

Delete Consistency Group

This command deletes an Enhanced FlashCopy consistency group. This command works in two ways:
v You can delete both the consistency group and the repository logical drives contained by the
consistency group
v You can delete only the consistency group and leave the repository logical drives that are contained by
the consistency group intact
Syntax
delete consistencyGroup [enhancedFlashCopyConsistencyGroupName
[deleteRepositoryMembers=(TRUE | FALSE)]]
Parameter
Parameter
enhancedFlashCopyConsistencyGroup
deleteRepositoryMembers

Delete Consistency Group Enhanced FlashCopy Logical Drive

This command deletes the Enhanced FlashCopy logical drive of a consistency group. Optionally, you can
also delete the repository members.
Syntax
delete cgEnhancedFlashCopyLogicalDrive ["enhancedFlashCopyLogicalDriveName"]
[deleteRepositoryMembers=(TRUE | FALSE)]
Description
The name of the Enhanced FlashCopy consistency group
that you want to delete. Enclose the Enhanced FlashCopy
consistency group name in square brackets ([ ]). If the
Enhanced FlashCopy consistency group name has special
characters, you also must enclose the Enhanced
FlashCopy consistency group name in double quotation
marks (" ").
The setting to delete on or retain the repository logical
drives. To delete the repository logical drives, set this
parameter to TRUE. To retain the repository logical drives,
set this parameter to FALSE. The default setting is FALSE.
Chapter 3. Script Commands
3-109