IBM System Storage DS3000 Programming Manual page 78

DS5000: 7.6x.xx.xx
Note: This command replaces Set Storage Subsystem iSNS Server Refresh starting with Storage
Manager version 10.83.xx.xx
Start Storage Subsystem Locate
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Stop subsystem Locate
DS3000: 6.17.xx.xx
DS4000: 6.16.xx.xx
DS5000: 7.3x.xx.xx
Stop Cache Backup Device Diagnostic
DS3000: N/A
DS4000: N/A
DS5000: 7.70.xx.xx (DS5000 only)
Stop Configuration Database Diagnostic
DS3000: 7.77.xx.xx
DS4000: N/A
DS5000: 7.77.xx.xx
Stop Cache Memory Diagnostic
DS3000: N/A
DS4000: N/A
DS5000: 7.70.xx.xx (DS5000 only)
Stop Consistency Group Enhanced FlashCopy Logical Drive
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Stop Consistency Group Enhanced FlashCopy Rollback
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Stop Controller Diagnostic
DS3000: 7.70.xx.xx
DS4000: N/A
DS5000: 7.70.xx.xx
Stop Disk Pool Locate
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Stop Drive Channel Fault Isolation Diagnostics
DS3000: Not supported
3-32
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide