Save Storage Subsystem Firmware Inventory; Save Storage Subsystem Infiniband Statistics - IBM System Storage DS3000 Programming Manual

Save Storage Subsystem Firmware Inventory

This command saves a report to a file of all of the firmware currently running on the storage subsystem.
The report lists the firmware for these components:
v Controllers
v Drives
v Drawers (if applicable)
v Environmental services monitors (ESMs)
You can use the information to help identify out-of-date firmware or firmware that does not match the
other firmware in your storage subsystem. You can also send the report to your IBM Technical Support
representative for further review.
Syntax
save storageSubsystem firmwareInventory file="filename"
Parameter
Parameter
file

Save storage subsystem infiniBand statistics

This command saves the InfiniBand performance statistics of the storage subsystem to a file.
Syntax
save storageArray ibStats [raw | baseline]
file="filename"
Parameters
Parameter
raw
baseline
3-178
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide
Description
The file path and the file name to which you want to save
the firmware inventory. Enclose the file name in double
quotation marks (" "). For example: file="C:\Subsystem
Backups\DBMbackup_03302010.dbm"C:\Program
Files\CLI\logs\fwinvent.txt"
This command does not automatically append a file
extension to the saved file. You must specify a file extension
when entering the file name.
Description
The statistics that are collected are all statistics from the
controller start-of-day. Enclose the parameter in square
brackets ([ ]).
The statistics that are collected are all statistics from the
time the controllers were reset to zero using the reset
storageArray ibStatsBaseline command. Enclose the
parameter in square brackets ([ ]).