IBM System Storage DS3000 Programming Manual page 548

Secure:
Drive type:
Enclosure loss protection: No
Preferred owner:
Current owner:
Segment size:
Capacity reserved for future segment size changes: Yes
Maximum future segment size:
Modification priority:
Read cache:
Write cache:
Write cache without batteries:
Write cache with mirroring:
Flush write cache after (in seconds): 10.00
Dynamic cache read prefetch:
Enable background media scan:
Media scan with redundancy check:
Pre-Read redundancy check:
Logical Drive name:
Logical Drive status:
Capacity:
Logical Drive ID:
Subsystem ID (SSID):
Associated subsystem:
RAID level:
Secure:
Drive type:
Enclosure loss protection: No
Preferred owner:
Current owner:
Segment size:
Capacity reserved for future segment size changes: Yes
Maximum future segment size:
Modification priority:
Read cache:
Write cache:
Write cache without batteries:
Write cache with mirroring:
Flush write cache after (in seconds): 10.00
Dynamic cache read prefetch:
Enable background media scan:
Media scan with redundancy check:
Pre-Read redundancy check:
Logical Drive name:
12-18
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide
No
Fibre channel
Controller in slot A
Controller in slot A
Enabled
Enabled
Disabled
Enabled
Enabled
Enabled
Enabled
Disabled
FDE_R1
Optimal
278.0 GB
60:0a:0b:80:00:33:98:48:00:00:c9:73:49:41:0a:a1
8
Secure_R1
1
Yes
Fibre Channel/Full Disk Encryption(FDE)
Controller in slot B
Controller in slot B
Enabled
Enabled
Disabled
Enabled
Enabled
Enabled
Disabled
Disabled
FDE_R6_B
256 KB
2,048 KB
High
128 KB
2,048 KB
High