Disable External Security Key Management; Disable Flashcopy - IBM System Storage DS3000 Programming Manual

Note: In previous versions of this command the feature identifier was remoteMirror. This feature
identifier is no longer valid and is replaced by syncMirror.
Parameters
None

Disable External Security Key Management

This command disables external security key management for a storage subsystem that has full disk
encryption drives.
Syntax
disable storageSubsystem externalKeyManagement
file="fileName"
passPhrase="passPhraseString"
Parameters
Parameter
file
passPhrase
Notes
Your pass phrase must meet these criteria:
v The pass phrase must be between eight and 32 characters long.
v The pass phrase must contain at least one uppercase letter.
v The pass phrase must contain at least one lowercase letter.
v The pass phrase must contain at least one number.
v The pass phrase must contain at least one non-alphanumeric character, for example, < > @ +.
Note: If your pass phrase does not meet these criteria, you will receive an error message.

Disable FlashCopy

This command stops a copy-on-write operation. This command performs the same action as the legacy
stop flashcopy command.
Syntax
disableFlashcopy (logicaldrive [logicaldriveName] |
logicaldrives [logicaldriveName1 ... logicaldriveNameN])
3-122
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide
Description
The file path and the file name that has the security key. For
example: file="C:\Program Files\CLI\sup\seckey.slk"
Important: The file name must have an extension of .slk.
A character string that encrypts the security key so that you
can store the security key in an external file.