Show Storage Subsystem Host Topology; Show Storage Subsystem Profile; Show Storage Subsystem Lun Mappings - IBM System Storage DS3000 Programming Manual

Show Storage Subsystem Host Topology

This command returns the storage partition topology, the host type labels, and the host type index for the
host storage subsystem.
Syntax
show storageSubsystem hostTopology
Parameters
None.

Show Storage Subsystem Profile

This command list detailed information about the storage subsystem configuration.
Syntax
show storagesubsystem profile
Parameters
Parameter
profile
Notes
The profile parameter shows detailed information about the storage subsystem. The information appears
on several screens on a display monitor. You might need to increase the size of your display buffer to see
all of the information. Because this information is so detailed, you might want to save the output of this
parameter to a file. To save the output to a file, run the show storageSubsystem command that looks like
this example.
-c "show storageSubsystem profile;" -o "c:\\folder\\storageSubsystemProfile.txt"
The previous command syntax is for a host that is running a Windows operating system. The actual
syntax varies depending on your operating system.
When you save information to a file, you can use the information as a record of your configuration and
as an aid during recovery.

Show Storage Subsystem LUN Mappings

This command returns information from the storage subsystem profile about the LUN mappings in the
storage subsystem. Default group LUN mappings are always shown. If you run this command without
any parameters, this command returns all of the LUN mappings.
Syntax
show storageSubsystem lunMappings [host ["hostName"] |
hostgroup ["hostGroupName"]]
Description
The parameter to show all of the properties of the logical
components and the physical components that comprise
the storage subsystem. The information appears in
several screens.
Chapter 3. Script Commands
3-277