Stop Drive Channel Locate; Stop Drive Locate; Stop Enclosure Locate; Stop Enhanced Flashcopy Group Pending Enhanced Flashcopy Images - IBM System Storage DS3000 Programming Manual

Stop Drive Channel Locate

This command turns off the indicator lights on the expansion drawers that were turned on by the start
driveChannel locate command.
Syntax
stop driveChannel locate
Parameters
None.

Stop Drive Locate

This command turns off the indicator light on the disk drive that was turned on by the start drive
locate command.
Syntax
stop drive locate
Parameters
None.

Stop Enclosure Locate

This command turns off the indicator light on the enclosure that was turned on by the start enclosure
locate command.
Syntax
stop enclosure locate
Parameters
None.
Stop Enhanced FlashCopy Group Pending Enhanced FlashCopy
Images
This command cancels all of the pending Enhanced FlashCopy images that are to be created on an
Enhanced FlashCopy group. If the Enhanced FlashCopy group does not have any pending Enhanced
FlashCopy images, the firmware displays an error message and does not run the command. You can run
this command on an Enhanced FlashCopy group or an Enhanced FlashCopy consistency group.
Syntax
stop (enhancedFlashCopyGroup [enhancedFlashCopyGroupName] |
consistencyGroup [enhancedFlashCopyConsistencyGroupName])
pendingEnhancedFlashCopyImageCreation
3-310
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide