IBM System Storage DS3000 Programming Manual page 54

Note: 7.10.xx.xx deprecates the hostType parameter.
Create RAID Logical Drive (Automatic Drive Select)
DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx
DS5000: 7.3x.xx.xx
Note:
v 7.1x.xx.xx and higher adds RAID 6 parameter.
v 7.50.xx.xx adds securityType parameter.
v 7.60.xx.xx adds DriveMediaType parameter.
Create RAID Logical Drive (Free Capacity-based Select)
DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx
DS5000: 7.3x.xx.xx
Note:
v 7.1x.xx.xx and higher adds RAID 6 parameter.
v 7.50.xx.xx adds securityType parameter.
v 7.77.xx.xx and higher adds T10PI parameter.
Create RAID Logical Drive (Manual Drive Select)
DS3000: 6.17.xx.xx
DS4000: 5.2x.xx.xx
DS5000: 7.3x.xx.xx
Note:
v 7.1x.xx.xx and higher adds RAID 6 parameter
v 7.50.xx.xx adds the securityType parameter.
v For version 7.60.xx.xx, you can change the Drives parameter to accommodate the enclosures
with internal disk drawers.
v 7.77 adds the T10 PI parameter.
Create Logical Drive on Disk Pool
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Create Read-Only Enhanced FlashCopy Logical Drive
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Create Remote Mirror
DS3000: 7.7x.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Note: 7.1x.xx.xx and higher adds RAID 6 parameter.
3-8
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide