IBM System Storage DS3000 Programming Manual page 65

Schedule Support Bundle Collection Configuration
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Note: This command is only compatible with Storage Manager version 10.83 and later.
Set subsystem
DS3000: 6.17.xx.xx
DS4000: 6.10.xx.xx
DS5000: Not supported
Note:
v RAID 6 is supported with 7.xx.xx.xx and higher.
v 7.30.xx.xx removes the availability parameter.
v For version 7.60.xx.xx, you can change the addDrive parameter to accommodate the enclosures
with internal disk drawers.
Set subsystem Forced State
DS3000: 6.17.xx.xx
DS4000: 7.1x.xx.xx
DS5000: 7.3x.xx.xx
Set Consistency Group Attributes
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Set Consistency Group Enhanced FlashCopy Logical Drive
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Set Controller
DS3000: 6.17.xx.xx
DS4000: 6.14.xx.xx
DS5000: 7.3x.xx.xx
Note:
v 7.30.xx.xx removed the bootp parameter and added the new Ethernet port options and the new
iSCSI host-port options.
v 7.50.xx.xx moved the IPV4Gateway parameter and the IPV6RouterAddress parameter from
the iSCSI host port options, to the command.
Set Controller Service Action Allowed Indicator
DS3000: 6.17.xx.xx
DS4000: 6.16.xx.xx
DS5000: 7.3x.xx.xx
Set Disk Pool
DS3000: 7.83.xx.xx and later
Chapter 3. Script Commands
3-19