Show Drive Channel Statistics; Show Drive Download Progress - IBM System Storage DS3000 Programming Manual

expansion enclosure, an alternative method for identifying a location for a drive is to specify the ID of
the drive expansion enclosure, set the ID of the drawer to 0, and specify the ID of the slot in which a
drive resides.

Show Drive Channel Statistics

This command shows the cumulative data transfer for the disk drive channel and error information. If
the controller has automatically degraded a disk drive channel, this command also shows interval
statistics. When you use this command, you can show information about one specific disk drive channel,
several disk drive channels, or all disk drive channels.
Syntax
show (driveChannel [(1 | 2 | 3 | 4 | 5 | 6 | 7 | 8)] |
driveChannels [1 2 3 4 5 6 7 8] | allDriveChannels) stats
Parameters
Parameter Description
The identifier number of the disk drive channel for
driveChannel
which you want to show information. Valid disk drive
channel values are 1, 2, 3, 4, 5, 6, 7, or 8. Enclose the
disk drive channel in square brackets ([ ]).
The identifier number of the disk drive channels for
driveChannels
which you want to show information. Valid disk drive
channel values are 1, 2, 3, 4, 5, 6, 7, or 8. Enclose the
disk drive channels in square brackets ([ ]) with the
disk drive channel value separated by a space.
The identifier that selects all of the disk drive channels.
allDriveChannels

Show Drive Download Progress

This command returns the status of firmware downloads for the disk drives that are targeted by the
download drive firmware command or the download storageSubsystem driveFirmware command.
Syntax
show allDrives downloadProgress
Parameters
None.
Notes
When all of the firmware downloads have successfully completed, this command returns good status. If
any firmware downloads fail, this command shows the firmware download status of each disk drive that
was targeted. This command returns the statuses shown in this table.
Status
Successful
Not Attempted
Partial Download
Failed
3-258
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide
Definition
The downloads completed without errors.
The downloads did not start.
The download is in progress.
The downloads completed with errors.