IBM System Storage DS3000 Programming Manual page 316

Parameters
Parameter
autoSupportConfig
profile
batteryAge
connections
defaultHostType
healthStatus
hostTypeTable
hotSpareCoverage
features
time
logicalDriveDistribution
longRunningOperations
summary
Notes
The profile parameter shows detailed information about the storage subsystem. The information appears
on several screens on a display monitor. You might need to increase the size of your display buffer to see
3-270
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide
Description
The parameter to show the status of the automatic
support data collection when a critical event occurs
along with the location where the Support Data
bundle was saved.
The parameter to show all of the properties of the
logical components and the physical components that
comprise the storage subsystem. The information
appears in several screens.
The parameter to show the status, the age of the
battery in days, and the number of days until the
battery needs to be replaced.
The parameter to show a list of where the drive
channel ports are located and where the drive
channels are connected.
The parameter to show the default host type and the
host type index.
The parameter to show the health, logical properties,
and physical component properties of the storage
subsystem.
The parameter to show a table of all of the host types
that are known to the controller. Each row in the
table shows a host type index and the platform that
the host type index represents.
The parameter to show information about which
logical drives of the storage subsystem have hot
spare coverage and which logical drives do not.
The parameter to show a list of the feature identifiers
for all enabled features in the storage subsystem.
The parameter to show the current time to which
both controllers in the storage subsystem are set.
The parameter to show the current controller owner
for each logical drive in the storage subsystem.
The parameter to show the long running operations
for each subsystem and each logical drive in the
storage subsystem.
The longRunningOperation parameter returns this
information:
v Name of the subsystem or logical drive
v Long running operation
v Status
v % complete
v Time left
The parameter to show a concise list of information
about the storage subsystem configuration.