IBM System Storage DS3000 Programming Manual page 70

DS5000: 7.6x.xx.xx
Set Storage Subsystem iSNS Server Refresh
DS3000: 6.50.xx.xx
DS4000: N/A
DS5000: 7.6x.xx.xx
Note: This command is replaced by Start Storage Subsystem iSNS Server Refresh in controller.
Set Storage Subsystem Learn Cycle
DS3000: 7.35.xx.xx and higher
DS4000: N/A
DS5000: 7.6x.xx.xx
Set Storage Subsystem Redundancy Mode
DS3000: 6.17.xx.xx
DS4000: 6.1x.xx.xx
DS5000: 7.3x.xx.xx
Set Storage Subsystem Remote Status Notification Time
DS3000: 7.77.xx.xx
DS4000: N/A
DS5000: 7.7x.xx.xx
Set Storage Subsystem Security Key
DS3000: 7.7x.xx.xx
DS4000: Not supported
DS5000: 7.5x.xx.xx
Set Storage Subsystem Time
DS3000: 6.17.xx.xx
DS4000: 5.4x.xx.xx
DS5000: 7.3x.xx.xx
Set Storage Subsystem Unnamed Discovery Session
DS3000: 6.50.xx.xx
DS4000: 7.1x.xx.xx
DS5000: 7.3x.xx.xx
Set Thin Logical Drive Attributes
DS3000: 7.83.xx.xx and later
DS4000: N/A
DS5000: N/A
Set VolumeCopy
DS3000: 6.17.xx.xx
DS4000: 5.4x.xx.xx
DS5000: 7.3x.xx.xx
Show subsystem
DS3000: 6.17.xx.xx
3-24
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide