IBM System Storage DS3000 Programming Manual page 401

Standby:
In use:
Full Disk Encryption: Enabled
Security key identifier: 27000000600A0B800029ECE60000DE9E4940E373
Number of drive enclosures:
Number of drive enclosures allowed: 28
Storage Partitioning:
Number of partitions used:
Number of partitions allowed: 2
Number of logical drives allowed per partition: 256
Access logical drive: LUN 31,31,31 (see Mappings section for details)
Default host OS:
Current configuration
Firmware version:
NVSRAM version:
EMW version:
AMW version:
Pending configuration
Staged firmware download supported: Yes
Firmware version:
NVSRAM version:
Transferred on:
Controller enclosure audible alarm:
NVSRAM configured for batteries:
Start cache flushing at (in percentage): 80
Stop cache flushing at (in percentage):
Cache block size (in KB):
Media scan frequency (in days): 1
Failover alert delay (in minutes): 5
Feature enable identifier: 303030323420303035353420493FECB1
Feature pack: DS5300
Feature pack submodel ID: 93
Storage Subsystem world-wide identifier (ID): 600A0B800029ECE600000000493FECAB
CONTROLLERS------------------------------
Number of controllers: 2
Controller in Enclosure 85, Slot A
Status:
Current configuration
Firmware version:
Appware version:
Bootware version:
NVSRAM version:
Pending configuration
Firmware version:
2
0
2
Enabled
2
Windows 2000/Server 2003/Server 2008 Non-Clustered
(Host OS index 2)
07.50.00.00
N1818D53R1050V03
10.50.G5.02
10.50.G5.02
None
None
None
Disabled
Yes
80
8
Online
07.50.00.00
07.50.00.00
07.50.00.00
N1818D53R1050V03
None
Chapter 4. Configuring a Storage Subsystem
4-19