Delete Enhanced Flashcopy Group; Delete Enhanced Flashcopy Image - IBM System Storage DS3000 Programming Manual

Delete Enhanced FlashCopy Group

This command deletes an entire Enhanced FlashCopy group and optionally the associated member logical
drives.
Attention: Possible damage to the storage subsystem configuration All of the data in the Enhanced
FlashCopy group is lost as soon as you run this command.
This command deletes an entire Enhanced FlashCopy group and optionally the associated member logical
drives.
Syntax
delete enhancedFlashCopyGroup ["enhancedFlashCopyGroupName"]
[deleteRepositoryMembers=(TRUE | FALSE)
Parameters
Parameter
enhancedFlashCopyGroup
deleteRepositoryMembers
Notes
You can delete an Enhanced FlashCopy group if it is empty or if it contains Enhanced FlashCopy images.
All of the Enhanced FlashCopy images in the Enhanced FlashCopy group are deleted along with the
Enhanced FlashCopy group. If any existing Enhanced FlashCopy image within the Enhanced FlashCopy
group has an associated Enhanced FlashCopy logical drive, each Enhanced FlashCopy logical drive is
stopped and detached from the Enhanced FlashCopy image. When you delete an Enhanced FlashCopy
group the associated repository logical drive is also deleted. By default, all member logical drives in the
repository logical drive are retained as unused, unmapped standard logical drives. To remove the
member logical drives set the deleteRepositoryMembers parameter to TRUE, or do not use this parameter.
To keep the member logical drives, set the deleteRepositoryMembers parameter to FALSE.

Delete Enhanced FlashCopy Image

This command deletes one or more Enhanced FlashCopy images from an Enhanced FlashCopy group.
Syntax
delete enhancedFlashCopyImage (enhancedFlashCopyGroup="enhancedFlashCopyGroupName" |
enhancedFlashCopyGroups=("enhancedFlashCopyGroupName1"... "enhancedFlashCopyGroupNamen"))
(deleteCount=numberOfEnhancedFlashCopyImages |
retainCount=numberOfEnhancedFlashCopyImages |
ignoreEnhancedFlashCopyLogicalDrive=(TRUE | FALSE) |
enhancedFlashCopyImageID=OLDEST)
3-112
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide
Description
The alphanumeric identifier (including -and _) of the
Enhanced FlashCopy group that you want to delete.
Enclose the Enhanced FlashCopy group identifier in
double quotation marks (" ") inside square brackets ([ ]).
The parameter to save or delete the member logical
drives. To save the member logical drives, set this
parameter to FALSE. To delete the member logical drives,
set this parameter to TRUE. The default value is FALSE.